EZ Receiver: every mycotoxin result recorded, checked and forwarded

EZ Receiver is the next-generation software from MCS Diagnostics for the intake of grain, feed and milk. It retrieves the result directly from the Charm reader, compares it to the limit you set per product, and sends the complete record to your LIMS. No retyping, no separate Excel spreadsheets, no result disappearing between the receiving pit and the office.

What EZ Receiver does for you

Results received immediately: The EZ-M sends every quantitative result via the network to EZ Receiver, including test, sample, operator, time and reader.
Checked against your limits: For each product and toxin, you set the limit applicable to your destination. An exceedance stands out immediately, highlighted in colour and in the action-required list.
Control samples and trends: Negative and positive controls are assigned their own limits and a trend line, allowing you to spot a deviating strip or reader before a consignment is assessed against it.
Approve with a signature: A result is released with an electronic signature; every modification is recorded in the audit trail.
To your LIMS: One file per result in CSV, XML or JSON, sent to a folder read by your LIMS. The Test export button allows you to verify the connection before an actual result is transferred.

Screens from the mycotoxin module

Eight screens from the mycotoxin module, exactly as they work at the intake pit and in the office.

Mycotoxin dashboard: 18 tests, 15 below the limit and 3 above, with the trend per commodity and the status of every reader.

Results list with concentration, status against the limit, commodity, sample, technician and reader serial number; approve or reject per row.

Limits per assay or toxin family, with the commodity as a separate, more specific rule; every change is signed.

Quality control samples with their own limits: number of QC runs, coefficient of variation per toxin and the latest run at a glance.

Every intake point is a location; readers identify themselves by serial number and show online or offline, with their result count.

Four eyes: review first, approval by someone else second, both signed and recorded in the audit trail.

Export to the LIMS: one file per result in CSV, XML or JSON, with approval status and the signature attached.

Audit trail with a SHA-256 chain: every login, setting, signature and database action can be traced and verified.

Driver kiosk: the driver adds context, the software guards it

At the intake pit there is no lab technician, there is a driver. The kiosk asks only what he knows, in his language, with large buttons and a signature pad. The result comes from the reader; the context comes from the person who delivered the load.

Capture at the source: Farm, intake point, tank or lot: the driver enters it while the sample is still in his hand, not hours later in the office.
Required fields per mode: You decide per mode which fields are visible and required. If something is missing, confirmation stops — no half records.
Signature as evidence: Name and signature belong to the result. Confirming without a signature is possible only if you explicitly allow it.
Positive means stop: A positive result shows the stop message with the lab's number; the queue stays open until a supervisor reviews it.
Straight into the results: Whatever is entered at the kiosk appears in the results list immediately and travels with the LIMS export.

pH, temperature and other data inputs

pH: Free text in the kiosk or a value supplied by the reader; a pH meter with keyboard output types straight into the field.
Temperature: Same route: manual, from a list or from the measurement; switchable per mode and can be made required.
Tank or lot: Tank number for milk, lot or load number for grain; from a list or free entry.
Farm and intake point: From a list or from the reader; the intake point determines the location in reporting.
Readers: Over the network (TCP 8101) or via NETWORK.TXT on the SD card for a reader without a network.

Linking signatures

The signature is stored as a separate PNG next to the export (EZ_<file>_signature.png) and can be found in the audit trail. Every user has a personal signature PIN; the name is recorded at signing. A release therefore belongs to a person, not to a shared kiosk password.

Driver Mode: the driver enters farm, intake point, tank, temperature and pH and signs with name and signature; a positive result blocks unloading.

The kiosk is locked with a PIN; the driver unlocks only his own entry, the supervisor keeps the rights.

On first start the supervisor chooses the kiosk location with his own PIN; that choice is stored on the PC.

Price

EUR 495 per year per site, excluding VAT. Unlimited readers, support and updates included. Sign up before 31 December 2026 and get the second year free. Try it free for one month first.

With expert service from MCS Diagnostics

Standards — which maximum level applies to your product and destination, and what changes on 1 July and 1 October 2027.
Sampling — a sampling plan tailored to your lot size and your receiving pit.
Validation — the strip and reader tested on your matrix, with control samples that stand up to an audit.
LIMS integration — the export configured and tested with your LIMS provider.

Want to see how it works at your receiving pit?

We demonstrate the integration with your reader and your LIMS, and calculate what the annual licence means for your sites.

<a href="/en/contact">Get in touch</a>